No products

Free shipping starts at $300 ex GST.

$0.00 Shipping
$0.00 GST Tax
$0.00 Total

Cart Check out

Spa Bath Treatment



Read the product SDS carefully before handling this product. 

1 Litre to every 75 Litre of spa bath capacity. 1.5 litres are normally adequate for a standard sized spa. 

  1. Fill spa to just above the jets. We recommend that you do not fill to operating capacity. 
  2. Add the required amount of product. 
  3. Run the spa for 3 to 5 minutes. 
  4. Empty the bath and clean in the normal manner. 

Timing of treatment: 
For domestic application: This sanitising procedure can be performed after the bath has been used and before emptying it thereby avoiding the need to refill the bath specifically for this procedure. As a minimum, the procedure should be carried out monthly where the bath has been used. 

For commercial or hospitality situation:
Each time the bath is used by a guest and before the next guest’s occupation. Please use the complementary indicator stickers to establish 
if the bath has been used. 

- See the Related Products tab.

Cyndan Spa-Bath Treatment is a non corrosive, nontoxic and non-irritating chemical solution for the cleaning and sanitising of refillable spas and baths.

For larger quantities please contact our office.

More details

Cyndan Spa-Bath Treatment has been researched and developed for the cleaning and sanitising of refillable spa-baths commonly used in hotels, motels, resorts, gymnasiums, clubs and even the home.

Water is an ideal medium in which germs can multiply and flourish. this is especially true and is made worse in warm water as is found in spa baths. Spa baths which are not attached to a filtering or chlorinating system such as home spas are a constant source of contamination.

Spa Bath Treatment is proven to kill unwanted organisms such as staphylococcus aureus and E.Coli, and is TGA certified as a commercial disinfectant option C.

The cleansing and sanitizing action of Spa Bath Treatment is required due to the fact that water residues remain in the pumping mechanism and are injected into the bath the next time it is used. This is a source of cross contamination of the water and is very unhygenic if not treated.

As a minimum, the process should be carried out monthly if the spa has been used.


  • Cleaning and sanitizing of refillable spa-baths
  • Non corrosive
  • Non toxic
  • Non irritating
  • Kills Staphylococcus aureus & E.Coli


  • Fill the spa to a level just above the jets. If possible, turn off air blower
  • Add 1L of Spa Bath Treatment for every 75L of bath capacity
  • Allow the treatment to circulate for 3-5 minutes
  • Empty bath and clean in the normal manner
  • The process should be carried out monthly if the spa has been used
  • Safety Data Sheet: Refer to the SDS before handling this product.
  • Storage: Store in the closed, original container in a cool, dry and well-ventilated place out of reach of children. | Do not store in direct sunlight.
  • Disposal: Containers must be thoroughly rinsed and dried before disposal. | Dispose of in accordance with your local government regulations - if in doubt return empty container to the manufacture. | Empty containers and product should not be burnt.
  • Safe Use - AMBER Code: Please use caution as per safe use and storage guidelines. Goods might be classified as Dangerous Goods. However, Amber items are safer to use as a result of replacing harmful ingredients with safer alternatives than what you find in Red Coded products.
  • Personal Protection Equipment (PPE): See 'Related Products' on this page.
Product added in cart.


    Contact Us