No products

Free shipping starts at $300 ex GST.

$0.00 Shipping
$0.00 GST Tax
$0.00 Total

Cart Check out

Revive Timber Cleaner



Read the product SDS carefully before handling this product.

Timber and decking: 1 part to 10 parts water and up to 70 parts water depending on the condition of the timber. 

Saw blades and related equipment: 1 part to 10 parts water. 

Timber and decking 

  1. Remove any loose contamination using a broom or washing down with water. 
  2. Wet the timber surfaces to be cleaned with water. 
  3. Apply the diluted product generously using a stiff bristle brush or broom to scrub the timber.  Clean complete sections at a time. Avoid spot cleaning. 
  4. Allow to dwell for 5 to 10 minutes, but do not allow to dry. 
  5. Thoroughly rinse the area with water. Preferably use a pressure washer. 
  6. Repeat steps 2 to 5 if required. 

Saw blades and related equipment

  1. Remove loose contamination.
  2. Apply product using a brush or low-pressure sprayer.
  3. Agitate with a brush is necessary.
  4. Allow to dwell:
    - Exposed metal surfaces - 2 to 4 minutes.
    - Painted and coated surfaces - 5 to 10 minutes.
  5. Thoroughly rinse all surfaces with water.
  6. Dry exposed metal surfaces using dry cloths and compressed air.
  7. Coat exposed metals with a suitable light service coating. 

- When treating timber, we recommend testing a small out of sight section.
- Avoid contact with aluminium and take care around painted surfaces.
- Best to apply to cool surfaces, out of direct sunlight to avoid drying on the timber.
- See Related Products tab.

Cyndan Revive Timber Cleaner can be used to break down and remove excess oils in timber. It is also used to clean vehicles, equipment and machinery in the timber and other industries where tree sap and sludge are a problem.

For larger quantities please contact our office.

More details

Cyndan Revive Timber Cleaner can be used to break down and remove excess oils in timber.

It is also used to clean vehicles, equipment and machinery in the timber & any other industries wherever tree sap and sludge need to be removed.

Revive Timber Cleaner is also used for the removal of gum from blades when working with timber.

  • Safety Data Sheet: Refer to the SDS before handling this product.
  • Storage: Store in the closed, original container in a cool, dry and well-ventilated place out of reach of children. | Do not store in direct sunlight.
  • Disposal: Containers must be thoroughly rinsed and dried before disposal. | Dispose of in accordance with your local government regulations - if in doubt return empty container to the manufacture. | Empty containers and product should not be burnt.
  • Safe Use - RED Code - Dangerous Goods: Only those personnel trained in the handling and storage of chemicals should use these products as they require the use of protective/safety gear when used and must be stored according to the manufacturer’s directions for safe storage.
  • Personal Protection Equipment (PPE): See 'Related Products' on this page.
Product added in cart.


    Contact Us