Cart  

No products

Free shipping starts at $300 ex GST.

$0.00 Shipping
$0.00 GST Tax
$0.00 Total

Cart Check out

Masonry Sealer

$82.00


Downloads

Read the product SDS carefully before handling this product. 

Coverage: 
Approximately 6 square metres per litre.  

Dilution:
First coat for dense surfaces – 1 part to 3 parts XYLENE 

  1. Remove any loose contamination, dust etc. 
  2. Ensure surface is silicone and oil-free. 
  3. Ensure the surface is completely dry before applying the product. 
  4. Apply using a brush or a low-pressure sprayer – ensure even coverage. 
  5. Allow 20 – 30 minutes between coats. 
  6. Apply 2 to 3 coats if a light lustre is desirable. 

Note:
- One good even coat is sufficient to seal.
- Ideal ambient temperatures for application are between 10oC to 30oC.
- Avoid applying in windy conditions.
- Do not apply if rain is likely within 12 hours.
- See Related Products tab.

Cyndan Masonry Sealer is a sealing compound specially formulated to seal and protect concrete, bricks and any masonry surface from oil, acids, water and other contaminants. Leaves an attractive semi-gloss sheen on the surface. It can also be tinted provide a 
For larger quantities please contact our office.

More details

Cyndan Masonry Sealer is a solvent-based sealing compound formulated to seal and protect masonry surfaces from organic and inorganic contaminants like grease, oil, fat and most chemicals. It is a hard-wearing topical coating that penetrates surfaces to create a lasting bond with the substrate.

Features:

  • Seals and protects concrete to provide a durable surface.
  • Prevents the absorption of unwanted substances into masonry surfaces helping to eliminate odours and unsightly staining.
  • Suitable for use on vertically surface to protect them from contaminants in industrial settings.
  • Suitable for use in AQIS inspected meat and food processing plants.
  • Can be tinted - see images below

Recommended applications:

  • Factories
  • Service Stations
  • Concrete roof tiles.
  • Shower block areas including urinal steps
  • Meat, fish and food processing work areas
  • Garage floors
  • Showroom floors

Tinted Sealer on Concrete Floor

The sample photo below shows Masonry Sealer with a subtle blue tint on an old factory floor.

On the right is the original untreated surface. The floor had once been painted and over time has also seen many spills of various liquids. The owner wanted to preserve the floor's history, but tone down the patchy discolouration. 

The floor received two coat of clear Masonry Sealer to prepare the surface, and then two coats of lightly tinted Masonry Sealer to finish the effect.

In this example, approximately 40ml of Taubmans tint 'E' was used in 5L of Masonry Sealer.

Tinted sealer for concrete floor

  • Safety Data Sheet: Refer to the SDS before handling this product.
  • Storage: Store in the closed, original container in a cool, dry and well-ventilated place out of reach of children. | Do not store in direct sunlight.
  • Disposal: Containers must be thoroughly rinsed and dried before disposal. | Dispose of in accordance with your local government regulations - if in doubt return empty container to the manufacture. | Empty containers and product should not be burnt.
  • Safe Use - AMBER Code: Please use caution as per safe use and storage guidelines. Goods might be classified as Dangerous Goods. However, Amber items are safer to use as a result of replacing harmful ingredients with safer alternatives than what you find in Red Coded products.
  • Personal Protection Equipment (PPE): See 'Related Products' on this page.

Download

SDS Info

Product added in cart.

News

    Contact Us

    ×

    Google Rating