No products

Free shipping starts at $300 ex GST.

$0.00 Shipping
$0.00 GST Tax
$0.00 Total

Cart Check out

Shield It



Read the product SDS carefully before handling this product. 

Coverage: Approximately 6 to 8 square metres per litre.  

  1. Remove any loose contamination, dust etc. 
  2. Ensure surface is oil-free – use a good quality degreaser if necessary.
    See Related Products tab.
  3. Consider using a suitable algaecide on older external surfaces to kill surface and sub-surface algae.
    See Related Products tab.
  4. Allow the surface to dry completely before applying the product.
  5. Apply using flat-head mop or a low-pressure sprayer. 
  6. Apply a second coat while the first coat is still wet – approximately 30 mins. 
  7. Allow 4 to 6 hours to dry. 
  8. Allow 12 hours to cure completely – avoid wetting i.e. rain in this time. 

Note: Avoid applying in hot or windy conditions.

Cyndan Shield It is a highly effective, solvent based penetrating sealer. It provides water & oil repelling qualities to concrete, brick and all masonry substrates. Shield It is not a surface or barrier coating; it deeply penetrates and chemically bonds with the substrate as an invisible shield without altering its appearance.

For larger quantities, please contact our office.

More details

Cyndan Shield It is a water & oil-repelling, microscopic, invisible shield. It is not a surface or barrier coating, instead, it deeply penetrates and chemically bonds with the substrate without altering its appearance and allows the substrate to breathe.

Shield It protects all low porosity and masonry substrates such as granite, marble, sandstone, pavers, exposed aggregate, brick, concrete and other natural stones to protect against water penetration, staining, chewing gum adhesion, efflorescence, corrosion of steel reinforcement, spalling and de-icing attack.

Shield It does not affect slip resistance and does not UV degrade or wear off in high traffic areas.

- Solvent-based
- Invisible
- Non-stick penetrating sealer
- Stain resistant
- Long lasting
- On all masonry substrates

- Staining
- Water penetration
- Efflorescence
- Concrete cancer
- Chewing gum adhesion
- Reduces spalling due to icing.

See the Related Products tab for other sealing options.

  • Safety Data Sheet: Refer to the SDS before handling this product.
  • Storage: Store in the closed, original container in a cool, dry and well-ventilated place out of reach of children. | Do not store in direct sunlight.
  • Disposal: Containers must be thoroughly rinsed and dried before disposal. | Dispose of in accordance with your local government regulations - if in doubt return empty container to the manufacture. | Empty containers and product should not be burnt.
  • Safe Use - AMBER Code: Please use caution as per safe use and storage guidelines. Goods might be classified as Dangerous Goods. However, Amber items are safer to use as a result of replacing harmful ingredients with safer alternatives than what you find in Red Coded products.
  • Part of the Cyndan GREEN SOLUTIONS Range: Product preserves the life of masonry surfaces.
  • Personal Protection Equipment (PPE): See 'Related Products' on this page.
Product added in cart.


    Contact Us