No products

Free shipping starts at $300 ex GST.

$0.00 Shipping
$0.00 GST Tax
$0.00 Total

Cart Check out

Concrete Wash



Read the product SDS carefully before handling this product. 

Dilutions: General cleaning - 1 part to 6 parts water. 

  1. Remove any loose contamination. 
  2. Prepare the surface using a good quality solvent degreaser. 
  3. Apply Concrete Wash using a brush or preferably an acid resistant sprayer. 
  4. Agitate with a brush or broom after application. 
  5. Allow to dwell for 2 to 5 minutes, but do not allow to dry. 
  6. Thoroughly rinse the area with water. Preferably use a pressure washer. 
  7. Repeat steps 2 to 6 if required. 

- Test on glazed surfaces before use.
See Related Products tab.

Cyndan Concrete Wash is ideal for deep cleaning concrete and masonry. It removes mildew, rust stains, mineral deposits, grease and dirt from all masonry surfaces. Used on terracotta, concrete, stone, bricks, tiles, workshop floors, monuments. Not suitable for high gloss surfaces. 

For larger quantities please contact our office.

More details

Cyndan Concrete Wash removes mildew, rust stains, mineral deposits, grease and dirt from all masonry surfaces.

Excellent for cleaning terrazzo, building and patio bricks, ceramic and quarry tiles, concrete floors and steps.

Concrete Wash does not colour or ‘burn’ the masonry surface. Concrete wash may also be used in cleaning pool filters and other plastic equipment.

Ideal for pool surrounds, monuments, workshop and food processing floors, etc.

Once the surface has been brought back to its original condition, keep the cleaned area looking pristine by sealing the substrate with Shield I.T. or Masonry Sealer, an invisible shield against grime.

- Mildew
- Calcification
- Grease
- Dirt

- Terracotta
- Concrete
- Stone
- Brick
- Tiles
- Workshop floors
- Monuments

  • Safety Data Sheet: Refer to the SDS before handling this product.
  • Storage: Store in the closed, original container in a cool, dry and well-ventilated place out of reach of children. | Do not store in direct sunlight.
  • Disposal: Containers must be thoroughly rinsed and dried before disposal. | Dispose of in accordance with your local government regulations - if in doubt return empty container to the manufacture. | Empty containers and product should not be burnt.
  • Safe Use - RED Code - Dangerous Goods: Only those personnel trained in the handling and storage of chemicals should use these products as they require the use of protective/safety gear when used and must be stored according to the manufacturer’s directions for safe storage.
  • Personal Protection Equipment (PPE): See 'Related Products' on this page.


SDS Info

Product added in cart.