Categories

Cart  

No products

Shipping $0.00
GST Tax $0.00
Total $0.00

Cart Check out

Sanosil S015 - Disinfectant concentrate for surface and water disinfection.

Sanosil S015 - Disinfectant concentrate for surface and water disinfection.

Sanosil S015 is a disinfectant concentrate for application in water systems. It can be used in water disinfection as well as surface, spray and aerosol disinfection. Sanosil S015 is ideal for water and/or pipeline disinfection and may also be applied diluted (usually at a rate of 4:1) as a surface disinfectant.

 

Please note: temporarily out of stock - you can pre-order now.

More details

$68.25


Sanosil S015 is a disinfectant concentrate for application in water systems. It can be used in water disinfection as well as surface, spray and aerosol disinfection.

Sanosil S015 is ideal for water and/or pipeline disinfection and may also be applied diluted (usually at a rate of 4:1) as a surface disinfectant. In concentrated state, Sanosil S015 diluted at 2:1 is used to combat highly contaminated surfaces with a high organic load.

Water Disinfection - For disinfection and preservation of process water, spray water, rinsing water, washing water, etc. a disinfectant quantity of 150-660ml per m3 of water is recommended. Depending upon the germ type and count, the contact time required is between 15 minutes - 4 hours. For drinking water treatment, please ask your Cyndan Account Manager to advise you on this process. Minimum requirements in reservoirs is 400ml per m3 for 90 mins.

Water Systems - For tanks, pipelines, drinking water equipment etc. a disinfectant solution consists of 6.6 litres of Sanosil S015 per 1,000 litres of water. Filling the water system with the disinfectant solution and leaving for 24hrs is all that is required. The solution is then environmental friendly enough for release into the sewage system.

Disinfection by Immersion - Working tools such as joints, screw fittings, utensils, cutting boards etc. can be immersed in Sanosil S015 diluted at 4:1 for 2-4 hours. This solution can be re-used for repeating this process for up to a week.

 

Applications

  • Water Disinfection.
  • Disinfection by Immersion.
  • Removal of: Bacteria, Viruses, Yeast and Fungi, Bacterial Endorspores, Biofilm.


Working Principle

The active substance used is hydrogen peroxide, an environment friendly solution. In a complex manufacturing procedure, the active substance is stabilized and boosted with silver, thus achieving a greatly improved effectiveness against micro-organisms. The traces of silver remaining on the treated surfaces are not visible and non toxic. However, they efficiently inhibit a renewed contamination.

The elemental oxygen (O2) separated by the hydrogen peroxide attacks the cell walls of the micro-organisms directly. The chemical reaction between the oxygen and the cell wall molecules will cause these to be denatured and destroyed. This effect is intensified by the silver ions which form a bond with the disulfide bridge of certain proteins of micro-organisms, thereby inactivating or precipitating these proteins.



  • Part of the Cyndan GREEN SOLUTIONS Range: Product residual is Oxygen & Water making it a safe disinfectant.
  • Safe Use - AMBER Code: Please use caution as per safe use and storage guidelines. Goods might be classified as Dangerous Goods. However, Amber items are safer to use as a result of replacing harmful ingredients with safer alternatives than what you find in Red Coded products.

Ultra Ever Dry video

Green Products

Explore Cyndan's full range of green products that are safer to use and better for the environment

Technical Support

Got a question? Cyndan has in house chemists and a team of technically trained consultants

CorporateVideo