Cart  

No products

Free shipping starts at $300 ex GST.

$0.00 Shipping
$0.00 GST Tax
$0.00 Total

Cart Check out

Anti Slip Treatment

$190.00


Downloads

Read the product SDS carefully before handling this product. 

Coverage:
Coverage varies depending on surface type. The following rates are indicative averages:
- Concrete: 5 square metres per litre.
- Ceramic/Vitrified Tiles: 7 square metres per litre.
- Marble/Granite: 10 square metres per litre.  

We recommend that the product only be applied by trained professionals and preferably by our accredited applicators. It is important to ensure safety standards are met. The approach to achieving the required non-slip level differs for each surface depending on the attributes of that surface which determine the required dilution ratio and dwell time. Also, incorrect application may damage the surface. 

We strongly recommend a test is performed in an inconspicuous area before proceeding to treatment of the entire surface. 

Cyndan Anti Slip Treatment is a non-slip solution for tiles, granite, terrazzo, etc. Etching treatment to prevent skidding and slipping.

For larger quantities please contact our office.

More details

Cyndan Anti Slip Treatment is a surface treatment and not a coating; therefore, it will not delaminate, yellow, or wear off, as coatings often do.

One application will last for up to 5 years, even under high traffic.

When applied according to instructions, the treated surface will comply with the Australian Safety Standard outlined in AS/NZS 4586:2004. (Wet Pendulum Test having mean BPN values between 45 - 70, Co-Efficient of Friction exceeding 0.6 for most areas).

Anti Slip Treatment is ideal for tiled applications in foyers, showers, bathrooms, kitchens, pool surrounds, commercial kitchens, food processing plants, hotels, hospitals, fitness clubs, shopping centres, outdoor public areas and any other ‘slippery when wet’ hard floor areas.

Use on glazed ceramic tiles, vitrified tiles, polished granite, terrazzo, quarry tiles, concrete, slate, porcelain bathtubs, and other hard floor surfaces.

After applying Anti-Slip Treatment, it is advisable to seal the treated pavement or flooring with Cyndan Shield I.T.

Shield I.T. is a penetrating sealer that will not affect the treated surface's appearance or slip-resistant qualities although it will provide long-term protection of the newly treated surface from staining by oils, grease, blood, coffee and other contaminants.

Councils around Australia are using Cyndan Anti-Slip Treatment products in their shopping districts:
The Timaru Herald (3rd September 2014) - No more slip-ups while going shopping >> 

Features:
- Safer when wet
- Does not peel
- Last up to 5 years
- Exceeds safety standards

Use on:
- Glazed ceramic tiles
- Vitrified tiles
- Polished granite
- Marble
- Terrazzo
- Quarry tiles
- Concrete
- Slate
- Porcelain

Ideal for:
- Foyers
- Bathrooms
- Food processing areas
- Public areas
- Bathtubs
- Pool surrounds
- Shopping centres
- Outdoor public areas

  • Safety Data Sheet: Refer to the SDS before handling this product.
  • Storage: Store in the closed, original container in a cool, dry and well-ventilated place out of reach of children. | Do not store in direct sunlight.
  • Disposal: Containers must be thoroughly rinsed and dried before disposal. | Dispose of in accordance with your local government regulations - if in doubt return empty container to the manufacture. | Empty containers and product should not be burnt.
  • Safe Use - AMBER Code: Please use caution as per safe use and storage guidelines. Goods might be classified as Dangerous Goods. However, Amber items are safer to use as a result of replacing harmful ingredients with safer alternatives than what you find in Red Coded products.
  • Personal Protection Equipment (PPE): See 'Related Products' on this page.
Product added in cart.

News